Thread: Crank Shaft Seal Blowing Out
Results 1 to 4 of 4
LinkBack URL
About LinkBacks-
09-03-2003 05:29 PM #1
CHR Member
- Join Date
- Sep 2003
- Location
- Deland, Fl
- Posts
- 4
Crank Shaft Seal Blowing Out
PLEASE HELP ME FIGURE THIS OUT!!
I HAVE A 67 350, IT HAS 140LBS OF COMPRESSION , AROUND 2500 RPM'S AND KEEPS BLOWING CRANK SHAFT SEAL OUT. THIS HAS HAPPEND 5 TIMES NOW AND I DID A PRESSURE TEST AND THE AIR LEAKED OUT OF THE VALVE COVER. COULD THE HEADS HAVE ANYTHING TO DO WITH CRANK CASE PRESSURE TO CAUSE THE SEAL TO BLOW OUT?
I WOULD APPRECIATE ANY INFO OR SUGGESTIONS!
THANK YOU
JOEYJoey Brooks
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
09-03-2003 05:58 PM #2
CHR Member
- Join Date
- Sep 2003
- Location
- Deland, Fl
- Posts
- 4
REPLY ON CRANK SHAFT SEAL
THANKS FOR THE REPLY.
ITS THE FRONT SEAL THAT KEEPS BLOWING OUTJoey Brooks
-
09-03-2003 06:57 PM #3
CHR Member
- Join Date
- Sep 2003
- Location
- Deland, Fl
- Posts
- 4
about 20 milesJoey Brooks
-
09-03-2003 07:22 PM #4
CHR Member
- Join Date
- Sep 2003
- Location
- Deland, Fl
- Posts
- 4
did the sleeve & seal kit, but would a bad set of heads , cause any thing like thatJoey Brooks
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project