Thread: Crank Shaft Seal Blowing Out
Results 1 to 4 of 4
LinkBack URL
About LinkBacksHybrid View
-
09-03-2003 06:29 PM #1
CHR Member
- Join Date
- Sep 2003
- Location
- Deland, Fl
- Posts
- 4
Crank Shaft Seal Blowing Out
PLEASE HELP ME FIGURE THIS OUT!!
I HAVE A 67 350, IT HAS 140LBS OF COMPRESSION , AROUND 2500 RPM'S AND KEEPS BLOWING CRANK SHAFT SEAL OUT. THIS HAS HAPPEND 5 TIMES NOW AND I DID A PRESSURE TEST AND THE AIR LEAKED OUT OF THE VALVE COVER. COULD THE HEADS HAVE ANYTHING TO DO WITH CRANK CASE PRESSURE TO CAUSE THE SEAL TO BLOW OUT?
I WOULD APPRECIATE ANY INFO OR SUGGESTIONS!
THANK YOU
JOEYJoey Brooks
-
09-03-2003 06:58 PM #2
CHR Member
- Join Date
- Sep 2003
- Location
- Deland, Fl
- Posts
- 4
REPLY ON CRANK SHAFT SEAL
THANKS FOR THE REPLY.
ITS THE FRONT SEAL THAT KEEPS BLOWING OUTJoey Brooks
-
09-03-2003 07:57 PM #3
CHR Member
- Join Date
- Sep 2003
- Location
- Deland, Fl
- Posts
- 4
about 20 milesJoey Brooks
-
09-03-2003 08:22 PM #4
CHR Member
- Join Date
- Sep 2003
- Location
- Deland, Fl
- Posts
- 4
did the sleeve & seal kit, but would a bad set of heads , cause any thing like thatJoey Brooks
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Thanks guys! It's been a long road. Fun doing finishing work for sure. Getting the dash ready for paint and some interior trim. Have to do some finish work on the aluminum headliner before...
Stude M5 build