the comp is good. now we have to dicide if you have a vac. leak or not. set the timing like you did yesterday, adj the idle to around 900 rpm's, screw the carb. air screws in all the way and back them out 2 1/2 turns. with the motor running, choke the carb. with the choke betterfly or with putting your hand over the top just a little and see if the motor ildes up or idle down. dont have to choke it but a little. or spray a mist of carb. cleaner into the top of the carb. and the rpm'm should pick up if you have a leak. if you spray the cleaner into the carb. and it dont make no dif. or it chokes the motor out, then there is no leak. that would probably mean the cam is to big. i cant stress enough that it only will take a little mist of carb. cleaner sprayed into the carb. to make a dif. let me know.