Thank You Orange, Cuda & Denny. First I'm going to try to clean it with the 320 wet/dry. Then if I have to I'll try pulling the pistons and honing it. I've never 'gone into' and engine to that degree before so I'm hesitant to do so. I just sooked the cylinders in oil cuz the motor sat for years with a couple of spark plugs out.
Originally I was going to put this motor into a '32 that I'm having built but now I'm thinkiing of building something else for it. I'm going to do another post and see what everyone thinks of my new plan.... Thanks again and tomorrow I'll hit Ace Hardware for the wet/dry Bill