Results 1 to 2 of 2
LinkBack URL
About LinkBacksThreaded View
-
06-07-2005 07:00 PM #2
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
Bore 0.030"
Keith Black #KB193 pistons (12 cc dish)
Cut block decks to pop pistons out of bore 0.006" at TDC
Fel-Pro #1003 head gaskets
Scoggin-Dickey #SD8060AGP L31 Vortec heads with valves and 0.525" lift springs installed. Machined for screw-in studs and guide plates (guide plates and studs not included) $356.47 each.
Order online www.sdpc2000.com
Tech line phone 1-806-798-4108
Edelbrock Performer RPM Air Gap Vortec intake #7516
Edelbrock AVS 650 carb #1805
Call your favorite cam grinder for a recommendation. I'd be thinking something like this for decent manifold vacuum.
http://www.cranecams.com/?show=brows...tType=camshaft
2,500 stall converter
1 5/8" headers
I have no way to nail down the horsepower or torque this motor would make. I just think it would make a good street motor. (9.55:1 c.r. to run on pump gas with the squish)Last edited by techinspector1; 06-07-2005 at 08:28 PM.
PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
time for a new forum to visit. when they sold sr.com it went down hill fast. no more forum just a cheap site selling junkie cars. the canadians killed hr.com. mods are real pricks. as with any site...
Where is everybody?