Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 350 v8 bad lifter doesn't pump up, what next to do?
          
   
   

Reply To Thread
Results 1 to 4 of 4
  1. #1
    joedawson is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    Sun Valley
    Car Year, Make, Model: 68 Chevy K20
    Posts
    3

    350 v8 bad lifter doesn't pump up, what next to do?

     



    So if I have a bad lifter...is that difficult to replace? Can I just take the intake manifold off and pop out the bad lifter? What tools do I need? Maybe just heavier oil since it doesn't tap when engine is cold?

  2. #2
    53 Chevy5's Avatar
    53 Chevy5 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Doon, Ia
    Car Year, Make, Model: 53 Chevy 3100
    Posts
    2,708

    i had the same thing after i redid the heads on my 76 chevy. i think your only hope is to pull the intake of and replace the bum lifter. you wont need any special tools to do it , they pull right out.

    i just thought of this, what if you try a heavier synthetic oil, its viscosity is always supposed to stay the same, it would be worth a try.
    Seth

    God cannot give us a happiness and peace apart from Himself, because it is not there. There is no such thing. C.S.Lewis

  3. #3
    american made's Avatar
    american made is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    cookvile
    Car Year, Make, Model: 1993gmc1500
    Posts
    5

    hey any gmc owners?
    4clinders,v6s,v8s,v10,long as it works

  4. #4
    docone31 is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2004
    Location
    Tampa
    Car Year, Make, Model: 86 Chevy Van-G20
    Posts
    106

    A while ago, I had the same issue. I had gotten a tool from Snap on that goes down the pushrod hole, grabs the inner lip on the lifter and if there is no lifter ridge, the tool can come out. The same tool also installs the lifter. If it is a fresh rebuild, the ridge should have been reamed by pulling the lifters for the rebuild.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink