Thread: 327 rebuild or swap
Results 1 to 15 of 19
Threaded View
-
02-24-2005 11:19 AM #12
Need more info to give good advice. stick or auto? gear ratio?motor run good now? Does it smoke, burn oil,smoke on startup,etc, check compression, Is it good on all 8 cylinders? The original motor had flat top pistons and 1.72/ 1.50 valves.What 37 Chevy did way back when was right on track. If your motor is in good shape now and you want to improve upon it you will be suprised. Moderation is the key with the small valves. Not too big on anything. From Summit- Comp Cams K Kit cca-k12-206-2 = cam, lifters, springs, locks, retainers, valve seals,tining chain and gear set. $279.95, Hedman Elite Headers = HED-68278,small tube,1 & 5/8 full tube thermal coated, $264.88 splurge here, its worth it. Summit header-back dual exhaust system with 2 & 1/4 pipes,$129.95 anything bigger will hurt performance. Not shown,but you can get a Edelbrock performer intake & 600 carb, breather, gaskets for $359.95 Thats $1035 ad $519.90 for Vortec heads,go1 bigger cam,Summit fuel pump$49.95





LinkBack URL
About LinkBacks
Reply With Quote
It would be nice if this up and down crap would cease.
Back online