Thread: tall deck build advice needed
Threaded View
-
08-30-2004 02:34 PM #1
tall deck build advice needed
Thanks for any help you have. I entered big block ville for the first time by buying a 427 tall deck four bolt bare block. Haven't even received it yet. I need advice on the build. My idea is for a 34 3 window. I want to do a blower motor, which will be my first. I have done a few small blocks, non blown, so I am not a total rookie, but new enough.
Stroker kit is what I am thinking, but would like some info on piston type/size. Rod length. Stroke lenth (how much will a 427T clear without a bunch of grinding?). Crank type. head type, I have none so these, so all will be new purchases. I did a search on big block blower motors and tech inspector answered a similar question about a short deck and honestly, I got lost in the translation. I basically need to know what rotating assembly I should use and what heads to put on it.
BTW, this is purely a braggin rights car, no racing. Just cruisin. the engine will go to 30 over.
thanks
Buzz
The last couple of weeks have been spent waiting on parts and getting the engine ready to put in the car. I found a manifold (turned out the guy I bought the center sump oil pan from had one). It’s...
1968 Plymouth Valiant 1st Gen HEMI