Thread: 427 Build what do I need

Tweet

Originally Posted by pat mccarthy

yep well i done many tall decks 572 to 638 .and gm 427 blocks 525to540 as well put a few in but built and machined way more one just went out the door. going in a 70 chevelle is a GM A body like a gto done the GTOs more then one time . but the headers i allways made the tall deck is not a big deal if you building headers were the rub comes in is that most race heads have a raised ex port of .300then you add your 400 to it = .700 lets just say 3/4 not many headers are going to work .power boosters never a big deal very few have much vacuum at idle anyways. far as the dist cutting them down and the intake plates that s just part of my job building engines no big deal just time. long has the customer knows this .now slip collars dist and intakes that are made for the tall deck are not hard to get not like it was 20 years ago

I agree completely. I have not built many with raised exhaust ports, and back when I did, they didnt go into anything that was going to be streeted regularly, so I will certainly have to leave that knowledge to you
I really cant say I dislike the way things have gone with the aftermarket.. I can remember going through cars at the salvage yards as well as their engine piles looking for certain parts and pieces.. in the early 80's when we started building 383's spending days calling places to find a 400 rotating assembly, and paying nearly as much for that worn out stuff as were paying for New now. I can remember when I was offered 2000 each for my Tall decks... you can nearly buy a merlin for that price now.


Pat is the "go-to" BBC guy and I wouldn't do anything he says not to, but just for grins, I assembled this BBC just to have some fun on the DynoSim software........

I'm old and stubbern, disagreeing with someone and THEN learning I am WRONG is the best way to get something through my thick skull.. but in this case were talking about apples and oranges.. I build a lot of engines but Most of the parts are not top end stuff like he is talking about. Most of the folks around here cant afford it. The 800 Dollar Aluminum heads from KMJ Performance are the norm rather than the cheap exception.

Tech1 I like that build.. might be worth looking at having the core shift checked on my last remaining tall deck just to do it! Thx!

Originally Posted by OldMech

I'm old and stubbern, disagreeing with someone and THEN learning I am WRONG is the best way to get something through my thick skull.. but in this case were talking about apples and oranges.. I build a lot of engines but Most of the parts are not top end stuff like he is talking about. Most of the folks around here cant afford it. The 800 Dollar Aluminum heads from KMJ Performance are the norm rather than the cheap exception.

I'm kind of the same way, in many instances Hot Rodding has become a game of who has the biggest checkbook and/or wants to be the guy who can brag about all the trick pieces in his engine and entire car for that matter! It's always easier to insist on the best of the best when you're spending someone else's money and not your own! I like the good pieces too but IMO some of them just aren't worth the expense for a street or street/competition engine but reality steps in and many of us have learned to make do with less.

We bracket raced for 5 seasons with the same cast crank, good rods and pistons, and "out of date" CJ heads on a 501" Ford then the guy who bought the car ran it a couple more seasons!!!! In the fall it got a leak down check, then taken apart and checked internally then put back together. The car only ran 10.50's but it would do it consistently and throughout it's lifetime put a lot of very high dollar cars back in the trailer! Could have bought a bunch of trick pieces for it, but for what we were doing with the car there was no reason to do it, a faster car with tons of $$$$$ in the engine doesn't make a whole lot of sense in dial-in, handicap start racing! Same goes for a street toy, street tires and a place to run it being the limiting factors.....If you can't hook it up why poor a ton of money into the engine? Heck, locally a lot of people say I put too much money in my stuff but my "budget" is a drop in the bucket as compared to what some THINK I should spend. I couldn't afford heads-up pro car racing anyway, so for me it always works best to let common sense and practicality determine the budget for the build.

BTW, many years back had a tall deck 427 in a '68 Nova...... A bit of rearranging on the floor board/firewall area was all it took to make out-of-the-box Hooker's work just fine on it!

Originally Posted by OldMech

I agree completely. I have not built many with raised exhaust ports, and back when I did, they didnt go into anything that was going to be streeted regularly, so I will certainly have to leave that knowledge to you
I really cant say I dislike the way things have gone with the aftermarket.. I can remember going through cars at the salvage yards as well as their engine piles looking for certain parts and pieces.. in the early 80's when we started building 383's spending days calling places to find a 400 rotating assembly, and paying nearly as much for that worn out stuff as were paying for New now. I can remember when I was offered 2000 each for my Tall decks... you can nearly buy a merlin for that price now.


Pat is the "go-to" BBC guy and I wouldn't do anything he says not to, but just for grins, I assembled this BBC just to have some fun on the DynoSim software........

I'm old and stubbern, disagreeing with someone and THEN learning I am WRONG is the best way to get something through my thick skull.. but in this case were talking about apples and oranges.. I build a lot of engines but Most of the parts are not top end stuff like he is talking about. Most of the folks around here cant afford it. The 800 Dollar Aluminum heads from KMJ Performance are the norm rather than the cheap exception.

Tech1 I like that build.. might be worth looking at having the core shift checked on my last remaining tall deck just to do it! Thx!

well if you think my customer have deep pocket s you and others on here are very wrong.... i used second hand bowties . pro blocks . others. many get welded and sleeved fixed by me . some things get reused . some heads are fixed or are blems cams cores get reground .titanium valves are used and cut down. hell when i started i never wasted my time at the junk yard for blocks and cranks i used the scrap yards in town to buy my parts by the pound . some of my best engines came off the scrap pile shopping deals and buying parts second hand was how i did it that 80s/90s .there is more to core shift on the 427 tall deck to look for. if you going past 100 over any thing up to a 4.250 crank in a drop in. 4.1/2 crank needs some work. not all blocks will take a 4.250 them are the ones to keep way from if your building a tall deck stroker less you want to open up the jackets