Thread: Crankshaft stripped 454 can I tap larger?

Tweet

Originally Posted by firebird77clone

Use a long bolt, then a shorter bolt, follow up with the final bolt.

Else use a piece of all thread with a nut and two washers

well i was going to say this not the best way as some 454 dampers have alot of press may times you wast time bending washer .tool works much better as it has a thrust washers try to used it if your going to do this bolt long short bolt deal. wipe crank nose with some oil or a small dab of moly lube . before you put the damper washer on i seal the key way with RTV