Thread: BBc cross ram intake

Tweet

SHould be a killer of low end torque.. Won't "pickup" 'til the middle and probably come on strong at 6 to 7 grand.. maybe more?!?!?!

Thanks for all replys ill be curious as to its performance

Hello I just dynoed my 498 with the X-C96 yesterday 625 horse 575 torque. at 3700 it was making 559 for torque . i also compared it to a team g intake with a 1050 dominator team g made more power but average numbers it was 1 hp above the cross ram . For a 1 horsepower I'll take the wow factor with the x-c96. My build is a solid street roller not the biggest but idles at 10 inches of vacuum and is a dual quad that starts with a simple turn of the key . I put 1200 miles on this motor before having a oil pick-up issue . motor repaired and it purrs like a kitten at 11 to 1200

A few simple things to do to make the intake drive well don't go overboard on carbs mine has a set of 500 hundreds 56 jets in front and a stock plate set in back mechanical secondaries . you also have to balance the left and right side temporary i used some heater hose and fitting between the two banks accessing the blow out plugs . solid roller cam 247/257 @50 pulls to 6200 and will run more