Thread: Harmonic balancer

Tweet

well the fit is a big part of the damper working like said in post #2../..#5.. this is far from a new thing that just started .i been dealing with dampers making some of them to fit for over 20 years .the finsh size on many will not come to size just so they can be tuned in. many dampers do let you know with big Words saying HEY check fit Dummy this it will need to be Fitted!!!!!!. many parts coming from many places it,s nice to know there some meat on the bone so you can adjust the press fit. if you do not have the tools then they need to find a guy that can do the job just like grinding a crank or rebuilding a rod .but there is many Oem dapmers that will work with a good press that i have used from Pioneer PEP that over all looks to be fine for oem .i see this as no diffrent then fitting bearing s. failing to check the fit on the damper will cost