Thread: Oiling concerns

Tweet

Originally Posted by jeepman1320

1200 rpm on the drill. What brand of distributors, other than MSD, come with o-rings?

the Orings are for added pressure for dist gear oiling may help not very much did i test on it but block has to be rework the dist hole in block needs to be rolled i do this in block prep.or will shear O rings. Msd has them cut for O rings you can do it to any dist with a lathe. i tried using a O ring thinking it would help at lower psi the stock O ring form msd did not seal good so went to a metric O rings to feel a better seal to the block i was lucky if i found 1or 2 psi never check oil for push rods i was not worry about that as it was a race engine and had no oil restrictors. engine