Originally Posted by
88blu
well it started as getting my truck back together but one thing led to another and i wanted to bore the block .030 over then i said if i do that i might as well stroke it. i plan to beef up the rear end and run the biggest slick that i can which i believe is 30'' tall and 13.5 wide. as far as the engine goes lunati has a hydraulic roller cam with 241/249@.050 with .612/.612 and using afr 305 heads or trick flow 280 oval ports do you think its possible? if not 11's at least close to 12 flat. do you think the afr 305 is too big for street use or will it work with my combo with a dual plane intake and 870 carb.