Thread: rebuilt gen 6 454 questions

Tweet

running out of fuel .did you tune this thing how much on the crank how much total timing .how fast is it coming in ? how tall is the back tire . how are you getting the hood to shut ? getting air to the engine ? how did you adjust the lifters ? the mark 6 has bolt stand .did you drill the heads for old bbc 7/16 studs or did you get the arp 7/16 top studs and the 3/8 bottom studs135-7102? for your heads. what push rods did you used ? i hear you say you had no money .what timing set did you use to clear the die cast cover .a stock old timing set if so did you degree it.....? you know cams are not that much i would of left it a roller hope the boys at that machine shop got you the right parts to swap it to hyd flat lifter cam . i spend lot of time swaping older block to rollers cams i just do not think that was a good move roller cams take outs are 40.00