Results 1 to 15 of 26
LinkBack URL
About LinkBacksThreaded View
-
02-20-2011 03:59 PM #8
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
them walls do not look good . thats from junk under the skirts from cam and lifter going a way . that is the load side so thats were bores get cut up .what helps stop some of this is preping the bottom of piston bores breaking the sharp edge at the bottom of bore . making sure the rings when filed that the rings have no burrs . back side of housing bore on rod looks like it should but as allways should be check if still round in the housing boreLast edited by pat mccarthy; 02-20-2011 at 04:09 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
i've enjoyed the years here . made a lot of friends. most who have left. i see no reason to continue with this so hope to see you somewhere else. i dont think this site will ever be back. it's lived...
Dead!