Thread: bbc head gasket ?

Tweet

heres one with the lower row that has holes .you can drill yours for added cooling your deck may only have one or two holes in the lower deck for cooling

Ok thanks for the input i will go with the felpros,Is it too late for any water jacket work now that the short block is all cleaned and assembled?

I am finding plenty of felpro 1071-1 on ebay are those what we are talking about?

Originally Posted by thor3228

I am finding plenty of felpro 1071-1 on ebay are those what we are talking about?

yes it is 10.5 cc for the F 1017-1. the f1037 is 9.7 cc so it up to you were you want your CR at

Are we talking about the same part # i see a 1071-1 and you say a 1017-1?

Originally Posted by thor3228

Are we talking about the same part # i see a 1071-1 and you say a 1017-1?

the 1017-1 are not MSL and will take a good shot of NO s they are about $40 each the 1071-1 are msl are $85 each and too thick about 053 at 4.380 bore. if your going that way look at 1071 is about 041 thick and bore is 4.380 at $71 eack . i can get cometics at $70 each that would be 4.320 bore at 040 thick or PM me if you want i have a set of 4.530 that are 030 thick that i can sell it a good price $110 with shipping

Thanks for all the info I am bidding on some 1017-1 on ebay ,Thanks again.

Originally Posted by thor3228

Thanks for all the info I am bidding on some 1017-1 on ebay ,Thanks again.

yep no big deal to me i going to put some bbc gaskets up on e bay myself. i am dealer for most parts .i machine and build alot of BBC from 396 to 632 +