Thread: streetable solid roller

Tweet

Originally Posted by King62

Hello Guys ,

I need advise from some people that know what they are talking about cause
I dont !!!

I have a chevy big block 461 steel crank, forged dome pistons edlebrock aluminum heads , 714 solid roller (comp cam), 1100 cfm holly hardcore dominator,3800-4000 stall converter.
350 long tail with all the work needed ,410 gears .

I dont want to use the car as a daily , but I would like to take a cruise one in a while and not have a problem .

Talk to me !!!

Thank you in advance

yep i run all that stuff on the street for many years what do you want to know. the trans i allways used 400 s. there is two things you have to watch for is the roller lifters and the hi stall = heat and kills the trans and stall . there is a list of things that kills the rollers lifters first is you need a very good oil one with alot of Zddp will not hurt and they need lots of oil at low speed i like to use the HIPPO that lets more oil on the cam and put oil in the roller pins