Thread: Hot Street 396 build, dyno numbers?

Tweet

My cam has no advance ground into it. Says right on the cam card. The intake centerline is 105. When I degreed my cam it came out at 105.25, so I left it alone. Do you guys think I should advance the cam some?

Originally Posted by 69elko

My cam has no advance ground into it. Says right on the cam card. The intake centerline is 105. When I degreed my cam it came out at 105.25, so I left it alone. Do you guys think I should advance the cam some?

just run it were it is .it is on a tight lsa but moving it would give you some more low end power ? with them small port heads it may work good do you have the room on the intake side to move it 4+?