Quote Originally Posted by pat mccarthy
well i think it may be hard to get that with the pump gas but velocity would be the blower running hard with a inter cooler and run a big valve to shovel it down the hole ?? i think port size would be ok on the small side but think the valve size of a 2.300 would not hurt and run more cam and cr you will have to drive the blower hard ??
Pat, you are correct about the blower building the velocity.
I guess if 8lbs. of boost wont push it through the port nothing will.
I had a mech. roller picked out that was 265/275 at .050 with .675/.675 lift and 114 l/s.
He does not want to adust the valves that is why he wants the hyd. roller.