Quote Originally Posted by pat mccarthy
the tall deck would get you cid and TQ low rpms but headers will have to be made if you are going to run this hard and may go past 6500 then go with a soild roller cam you can use a hyd roller cam but them lifters may not want to hang on to the caM LObes at HI RPMs ALL IT TAKES is one time and it will be trash it you are not going to put many miles on it then a soild roller is the way i would go . what do i think of world blocks? any block will hold the power you want to make i have had block s that took over 1000 hp bowties darts and worlds if prep is good they all will take it the dart and world have much more iron in them so they can take a big bore better and the bottom end has more beef so if you are going past 1000hp with a big bore 4.600than them are the ones you want if not then your do not need it they are very heavy
Ok, I think the short deck is better for me. what cubic do u think would be great for my situation? and if the solid roller is the way to go i wouldnt mind.
Do u recommend any cams that will work well with it?