Quote Originally Posted by erik erikson
These heads might work if you have 14 to 1, on alky,8,500 rpm's, 5,500 stall,and a transbrake in a rail that weighs around 2,000 lbs.
i like the big cid big blocks. but all ways wanted to build a 13.5 cr roller with a big stick in it. 396 with a rock soild bottom end and some big killler heads and put it in my goat for the hell of it. and come out at 8500 but to do this it would be the same almost to build the big stuff i do. had some small big block back in 1980 and ran good but were mild and i beat a lots of stuff .they were a fun engine you could get a engine for about $50 bucks