Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Engine Build
          
   
   

Results 1 to 13 of 13

Threaded View

  1. 06-04-2006 11:09 PM #11
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    i think the cam is ok but for the blower more dur on the ex side like 272 . but not to much more lift on the intake side you will be pushing it in with the blower and may be some thing with more lobe center and the 4-7 swap i would call them and see what they say. i have one more cam that i can run .some thing i have. but it would not be to night .tomorrow i do not like them 121 cc head for the small bore .you will have to run some dome on the piston for 10to1. it would be good to run a flat top with the blower
    Last edited by pat mccarthy; 06-04-2006 at 11:13 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink