Thread: Engine Build
Threaded View
-
06-04-2006 04:26 PM #1
Engine Build
I was wondering if anyone could run this through a Desk Top Dyno and let me know roughly what kind of power it will make and if I should change anything. Here is the engine:
454 block
AFR 335cc Fully CNC Ported Magnum BBC Head
121cc Compustion Chamber
Valves 2.3in 1.88exh
Intake
.200 - 164
.300 - 240
.400 - 304
.500 - 352
.600 - 385
.700 - 404
.800 - 410
Exhaust
.200 - 144
.300 - 197
.400 - 257
.500 - 285
.600 - 311
.700 - 319
.800 - 325
Voodoo Mechanical Roller Camshaft
Lift: .680''/.680''
Adv. Duration: 285°/293°
Duration @ .050'': 255°/263°
RPM Range: 3000-7200
Edelbrock RPM Air-Gap intake (dual plane)or Victor Jr. (single plane)
Proform 850cfm
10:1 compression (forged rotating assembly)
2 1/8" headers
roller lifters
1.8 roller rockers
if i am leaving anything out just ask and i will let you know. I have never built a big block before and need all the help I can get.
When my mother-in-law's goldfish died she thought a good replacement would be a hamster. The poor little thing drowned in seconds. .
the Official CHR joke page duel