Threaded View
-
01-14-2006 04:01 AM #1
nitrous?
hi guys,
Can i use nitrous on this Camshaft?
Hydraulic flat tappet
2,300-6,500 RPM
Duration at 050 inch Lift: 240 int./246 exh.
Advertised Duration: 284 int./296 exh.
Valve Lift with Factory Rocker Arm Ratio: 0.574 int./0.578 exh. lift
Lobe Separation (degrees):110
Another question, I was told this engine takes 6 quarts of oil. Is that correct? It's a remanufactured 350 with stock pan.
SB distributor won't fit