-
01-14-2006 04:01 AM #1
nitrous?
hi guys,
Can i use nitrous on this Camshaft?
Hydraulic flat tappet
2,300-6,500 RPM
Duration at 050 inch Lift: 240 int./246 exh.
Advertised Duration: 284 int./296 exh.
Valve Lift with Factory Rocker Arm Ratio: 0.574 int./0.578 exh. lift
Lobe Separation (degrees):110
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
01-14-2006 03:24 PM #2
Yes, it will work to a 150 shot.I would like to see a few more exhaust degree's duration and a little wider lobe seperation.
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
Finally tracked down my AC leaks, had to buy a sniffer tool to do it. It was one hose fitting that attached to the condenser and one quick connect fitting on my AC manifold hose. The thrill of...
Stude M5 build