Timing set is a BB Chevrolet Standard Jesel Belt Drive system sdpc2000.com part #KBD-32000 $900.

harmonic balancer is a ATI 7” Aluminum Damper internal balancer. jegs part #085-917300 $389.99

heads are AFR BB-Chevy Competition Aluminum Cylinder Heads jegs part #033-20108035 $5,879.98
Competition 5-angle Valve Job Intake Valve, 2.250'' stainless steel Exhaust Valve, 1.880'' stainless steel 1.625'' OD Roller Dual Valve Spring with dampner, 240 lbs. on seat, .750'' maximum lift
10º Chrome Moly Retainers 10º Chrome Moly Valve Locks Valve Seals Hardened Shims Intake Valve Seats Exhaust Valve Seats
Bronze Valve Guides Intake Bronze Valve Guides Exhaust
Guide Plates 7/16'' ARP Exhaust Rocker Studs and 7/16'' Intake Rocker Studs .

Milodon Copper Head Gaskets Bore: 4.500-4.530'' Thick: .040'' jegs part #697-40015 $153.98

I will be using a adjustable pushrod length check'r before ordering a set of 3/8” Manley 4130 Steel 1 Piece Design rods

and camshaft and lifters , I have not ordered them just yet.

oil pump is a Moroso Billet Aluminum Gerotor Oil Pump jegs part#710-22167 $459.99

Oil Pan will be custom fabricated, and powder coated , along with the engine block and transmission with mirror red powder from eastwood.

and a BDS 10-71 polished stage 3 blower with intercooler and EFI bugcatcher kit. I have not ordered this as of yet.

the headers will be a custom fabricated out of stainless steel, mostly for good looks with Stepped primary tubes.

I will post more updates as soon as I decide what to order and as I get more info. thanks in advance.