Ok most said cam was too big. I called comp cams and they gave me a recommendation. Now I am by far no cam expert, but I beleive what they recommended isnt too far off from what I originally had listed, but like I said when it comes to cam geometry I am an idiot. So any input again would be appretiated.

To review here is the cam I had originally listed:

247/251 @ .050
.579/.594
112 lobe


New cam listed by Comp Cams (note cam is same as used in Recon 496 motor and World 509 motor)

Xtreme Energy
240/246
.574/.578 @.050
110 lobe