Thread: Door Threshold
Threaded View
-
11-22-2010 10:51 AM #1
Door Threshold
I'm needing to get/make a door threshold to cover wiring, and to cover the carpet edge. With a 1" channel my threshold has an extra "step". I have considered making one out of some nice walnut, hollowing out a wireway on the bottom and dropping over the edge about an inch to meet the step shown and finishing it to a satin shine. The edge bows out in the middle, so it will be cut to fit. Also thinking that a re-pop stock piece might still fit OK, even with the channel. Here's what I'm dealing with - the tape comes down to the extra step which is nominal 1/8" inset from the "natural" edge below it. I know tha in time a wood piece is going to be scuffed and will require periodic refinishing. Any thoughts? Good source for a re-pop threshold, if that is the answer?Roger
Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.
I’ve been out of the loop on here lately and I hope everyone is doing okay. There have been a lot things going on with me and I had to put all of my extra projects on hold for a while. I’m pleased...
Been gone for a awhile, here's an...