Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: C-4 noises
          
   
   

Reply To Thread
Results 1 to 8 of 8
  1. #1
    junkyardjeff's Avatar
    junkyardjeff is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2003
    Location
    Dayton
    Car Year, Make, Model: 37 chevy p/u 55 ford convertable
    Posts
    629

    C-4 noises

     



    I have a C-4 in my 55 sunliner and the trans is making some noises that sound to me like some bushings are going bad,the shifting of the trans has not changed but the noise is getting louder. Other then the output shaft and possibly a bushing in the pump for the convertor are there any other bushings between those two that I need to specify to be changed by whoever rebuilds the trans if those parts are not normally changed during a rebuild.

  2. #2
    HOSS429's Avatar
    HOSS429 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2007
    Location
    New Market
    Posts
    2,590

    everything that spins turns on a bushing .. clutch drums,sprag gears ..a competant builder will replace all bushings anyway ...

  3. #3
    Itoldyouso's Avatar
    Itoldyouso is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    fort myers
    Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
    Posts
    11,033

    Just for giggles, check the torque convertor to flexplate bolts. Sometimes those work loose and sound like something serious is wrong.

    Don

  4. #4
    Mr Blue's Avatar
    Mr Blue is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2007
    Location
    Bonita Springs
    Car Year, Make, Model: 23 Ford T, 2004 ZO6 Vette, 99 Mustang
    Posts
    542

    I just had it happen on a buick station wagon I had. Sounded like the tranny was going south. Turned out the flex plate bolds were lose. Tighted them up and everything was perfect. Worth a try!
    Don Jr.
    Don Jr.
    "Once again I have thoroughly disgusted myself"

  5. #5
    junkyardjeff's Avatar
    junkyardjeff is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2003
    Location
    Dayton
    Car Year, Make, Model: 37 chevy p/u 55 ford convertable
    Posts
    629

    I will give that a try but its just a 65 dollar junkyard trans I was going to rebuild but thought I would see if it was good,been in for 5 years and over 10,000 miles and got me to Daytona and back last year so if it does need repaired I go my 65 dollars worth. Its not rattling like a loose convertor would be but sounds like bushings are going bad and the noise is in step with the rpms but well worth checking the convertor bolts first,I had not planned a rebuild for it just yet since I am going to go back with a Y block next year but if I want to go to Daytona this year a rebuild might have to happen.

  6. #6
    Itoldyouso's Avatar
    Itoldyouso is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    fort myers
    Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
    Posts
    11,033

    They just aren't making those $ 65 transmissions like they used to. You got better use out of that one than most people get on an AAMCO rebuild.

    Don

  7. #7
    junkyardjeff's Avatar
    junkyardjeff is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2003
    Location
    Dayton
    Car Year, Make, Model: 37 chevy p/u 55 ford convertable
    Posts
    629

    The trans was painted blue so I figured it was gone through but probably just a quick rebuild.

  8. #8
    IC2
    IC2 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    UPSTATE New York
    Posts
    4,336

    Once you get it out and on a bench, that C4 is a relatively easy home rebuild with reasonably priced kits available. If you get fancy with upgrades, it does get a bit harder as well as (much!) more expensive.

    Heck, if I can do a C4, anybody can -
    Dave W
    I am now gone from this forum for now - finally have pulled the plug

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink