Quote Originally Posted by vara4 View Post
It got a problem right now with the after market dip stick that came with my Canton 8 qt. oil pan. Instead of putting a threaded nut at a angle so the stick can go down in to the oil they put the threaded nut straite out of the side so the dip stick goes straite in side ways. Stupid Design!!! I tried to used the factory dip stick on the front of the motor but that hits the windage tray screen and won't go thru. So I now have to take the pan off and drill the screen so the engine wiil except the stock dip stick.
I spent about $700 bucks on the set up and they can't make a dip stick that works with thier pan. Kurt
Are you sure that threaded boss on the side is not there for a turbo oil return line? My SBF pan has an "extra" boss in the side, too, but the builder says that it is put there because so many of the aftermarket applications run turbo's, and it's easier to put in a plug on the side than to have two designs. You might ask Canton about theirs?