Thread: Muncie 4 speed is hard to shift
Results 1 to 15 of 21
Threaded View
-
01-11-2010 04:43 AM #1
Muncie 4 speed is hard to shift
Here is a question for the stick shift fans out there. Why is my Muncie 4 speed overly stiff to shift ? I think that the 4 to 3 shift is the worst but it's quite stiff in all forward gears (not reverse) I purchased it as a used unit it came with an old shifter that is very sloppy. I did take the side cover off to check for broken bits before fitting to the car. I couldn't get a new gasket so I made my own from gasket paper. The paper that I used was a little thicker that the original gasket would that make a difference ?
Cheers Manky
"......toe needs to be set at the tread center......" Yup and with something with independent suspension the weight of the car needs to be on it and preferable on turntables that allow the...
Toe Adjustment