Thread: Do I use lock washers when I bolt on my flexplate?

Tweet

.....Thanks Poncho62! .... Actually ARP is right by my house so I went & got some of their bolts. Because of the Hot Heads Hemi adapter the stock Hemi Flexplate bolts were to short {they are 1/2" long} so I went with the Hemi Flywheel bolts that were 1/2" x 20 x .875 long. They don't use washers on them. So I used these bolts & the Red Lock Tight.... Thanks again! Bill

Hi Bill,
I saw you asking about flywheel torque in a post befoire. without knowing the bolt size it is improper to spec the bolt torque. The 55-60 is for a 7/16" bolt. The 1/2" should be 75-85 ft lbs.
I believe the 914 MR G does include the lock washers and providing the bolts have clearance for the clutch disc I would use them.
Mike Forte