Thread: 1967 gs buick 400
-
09-05-2008 04:50 PM #1
1967 gs buick 400
I Going To Paint This Car, The Transsmission Is Leaking Bad, If You Look At It You'd Think The Front Yoak Is Leaking In The Center, So I Pulled The Drive Shaft It Looks Like It's Supposed To Have A Hole And The U Joints Look Pressed In Need Some Help (it's A 3 Speed Automatic) JUST READ THE ANSWER TO MY QUSTION BUT ARE THESE U JOINTS PRESSED INLast edited by craig akiyama; 09-05-2008 at 05:04 PM.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
09-28-2008 12:11 PM #2
There is supposed to be a plug on end of the yoke something like a freeze plug so it looks like its time to weld up or new yoke.
-
10-05-2008 03:45 PM #3
thanks u joints pressed in but felt good, cleaned up with a grinder and used popicicle stick and j b weld so far has held upLast edited by craig akiyama; 10-07-2008 at 02:30 PM.
here's the latest, I had to cut up the cross section of the frame to get the parallel bars in place and these pic's show my fix . 3 x 6 tube used to rebuild the frame section. [/URL] after lots...
New Project