Thread: Saginaw Grinding into 4th
Results 1 to 8 of 8
LinkBack URL
About LinkBacksThreaded View
-
05-01-2008 03:32 PM #1
CHR Member
- Join Date
- Feb 2005
- Location
- Ithaca
- Car Year, Make, Model: 1954 GMC Panel, 1953 Willys Wagon, 1955
- Posts
- 212
Saginaw Grinding into 4th
55 Willys 4x4 pu 327/ Saginaw grinds going into 4th and sometimes 3rd, It has been apart to get a different main shaft (Advance Adapters) so that it will mate to a Dana Transfer case, While apart it got all new bearings and the brass syncro rings. All the gears looked good no chips, marks or missing teeth. New clutch with master /slave. Was thinking it was not bled out, but the Trans will go into rev without making a fuss. Any one point me in the right direction??
Thanks EdLast edited by 53 Willys; 05-01-2008 at 05:36 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Dammit, another good ol boy gone. Condolence to the family. RIP Mike
RIP Mike Frade, aka 34_40