Thread: th400 vs 350 size
-
02-12-2008 12:37 AM #1
th400 vs 350 size
Just wondering off hand is a turbo 400 tranny physically bigger than a turbo 350? Just getting a little tight for my foot controls and steering column on mt '27 T build.
Thanks,
Sean.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
02-12-2008 01:08 AM #2
yeah its a tank compared to a t-350
-
02-12-2008 01:22 AM #3
This site should have all the info you will need . ***** MalibuRacing.com - THE 78-83 Malibu Performance Site! ***** Then at the top go to tech . Then Transmission swap page . Lots of COOL stuff there
-
02-12-2008 01:30 AM #4
Thanks Tango that answers my question. Looks like I'd only get about 3/8" /side with a swap. Just gonna have to get creative I guess. Maybe I could notch out that bellhousing a bit!!
Sean.
-
02-12-2008 01:37 AM #5
Your running a SB Chevy so that 350 Trans will be ok . And you car is light . My friend had a V8 Vega . He ran a TH400 with the stock floor . But we had to cut off the ears of that 400 trans . And it was a tight fit
-
02-12-2008 03:54 AM #6
do you folks build your stuff with everything down the center of the frame .. what if you scooted everything over an inch to the right .. doesnt the factory do that to counterbalance driver weight ..iv`e used up all my sick days at work .. can i call in dead ?
here's the latest, I had to cut up the cross section of the frame to get the parallel bars in place and these pic's show my fix . 3 x 6 tube used to rebuild the frame section. [/URL] after lots...
New Project