Thread: T-5 Tranny question
Results 1 to 3 of 3
LinkBack URL
About LinkBacks-
01-16-2008 12:59 PM #1
CHR Member/Contributor
- Join Date
- Jul 2007
- Location
- Ellsworth
- Car Year, Make, Model: 29 Essex RS Coupe
- Posts
- 377
T-5 Tranny question
Hi folks. I have an inline 6 cylinder 230 from a '69 camaro that apparently had powerglide. I have no bell housing! I want to install it in our Rod Project and use a Chevy S-10 standard 5 speed behind it. Can someone tell me what I need please? I posted this on the inline forum but didn't get the answer I need. I presume I need to change the flywheel on it. Thanks in advance. perley oldrodder43
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
01-16-2008 01:26 PM #2
CHR Member
- Join Date
- Aug 2006
- Location
- apollo
- Car Year, Make, Model: 96mustang,56dodgepu,39fordpu,69camaro
- Posts
- 256
Your gonna have to find a T5 that was behind a 4.3L s10, or one out of a camaro, and get a flywheel for the inline, but Im not sure what clutch would work for you, Ill try to find out...
-
01-16-2008 02:21 PM #3
CHR Member
- Join Date
- Jun 2005
- Location
- Eston
- Posts
- 2,270
A regular Chev aluminum bell will work, V8 or six. Flywheel, too. Most T5's will work,too, but the S10 ones have the shifter farther forward than the Camaro/Firebird, depends on your application. Even the Chevette trans will work on your six.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project