Thread: 4 spd Toploader rebuild help
-
09-04-2007 05:13 PM #1
4 spd Toploader rebuild help
I have a RUG-M1 that came out of the stang . I've been looking at rebuild kits and a main shaft . It also needs a couple gears 2nd and 3rd (i think i looked right ) they are seized to the shaft due to lack of gear oil . About the cheapest master rebuild i found is $141 includes all the wear parts . Main shaft was $139 gears are in the $75 range . Does anyone have a site or link with possibly better sales with quaility parts .
Added this pic and arrow to the gears that are seized upLast edited by bluestang67; 09-04-2007 at 06:12 PM.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
09-04-2007 05:45 PM #2
Were those prices through David Kee? I found some other sources one night with a google search for "toploader parts".Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
09-04-2007 05:53 PM #3
Dave David Kee was 141 for kit this place is T&B transmission and gear for main . i had to go back and search again i read so much last niteLast edited by bluestang67; 09-04-2007 at 06:09 PM.
-
09-04-2007 06:13 PM #4
t&b ? where is that located?
-
09-04-2007 06:16 PM #5
Spokane ,Wa is where it says for T&B
-
09-06-2007 10:20 AM #6
David Kee is the best in the industry when it comes to Toploaders. jimig@standardtransmission.com
-
09-06-2007 02:12 PM #7
i live about 10 minutes from t&b
-
09-06-2007 04:24 PM #8
Gasser you willing to deliver LOL joking a bit
Jim i will rebuild but looking for great part pricing . Help will be from a rodder near by .
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project