Thread: TH350 overdrive ID
Results 1 to 4 of 4
LinkBack URL
About LinkBacks-
08-23-2007 04:40 AM #1
CHR Member
- Join Date
- Aug 2007
- Location
- Bastrop
- Posts
- 8
TH350 overdrive ID
I have a TH350 Trans in a hotrod which has an electric plug-in on the drivers side. As I understand; that would make it a 1984 or newer unit. I presently do not have anything plugged into it altho I do have a pigtail to plug into it. Does having the plug-in make it an overdrive unit? If it is an overdrive unit; how would I wire it to utilize the OD?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-23-2007 05:11 AM #2
CHR Member
- Join Date
- Jun 2005
- Location
- Eston
- Posts
- 2,270
It's a locking converter 350, not OD. That plug is for lockup.
-
08-23-2007 06:14 PM #3
CHR Member
- Join Date
- Aug 2007
- Location
- Bastrop
- Posts
- 8
oh, yes,,,locking converter. Again then, what would it take to get the locking converter to lock up?
-
08-23-2007 06:52 PM #4
CHR Member
- Join Date
- Jun 2005
- Location
- Eston
- Posts
- 2,270
Just hook up 12v to it, with a switch on the dash or somewhere convenient so you can lock/unlock it at will.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project