Thread: 350 trans shift out first

Tweet

shift kit wont raise the shift points, i have the same problem when i put my car together tranny set up for 2,45s and then put 3,50s in it. i have a low rpm 2nd 3rd and even lower 1st 2nd especially for the track
you either need the correct governor for the ratio or modify the old one.
i just in fact tried another governor i got from a tranny shop in it tonight, its got real small square narrow way too high 2-3 perfect 1st-2nd at about 4800 rpm
back to the drawing board to lighten the existing weights
i am going to drill 1/8 holes on the outer edges of the inner weights and give it a shot and see what it does and go from there