All Geared up, with no way to go!

Printable View

04-15-2007, 05:14 PM
Jas

All Geared up, with no way to go!

I have a 1966 Ford F-100 w/ 352 and a three on the tree. I was at our local hot rod car cruise last night when I decided to stop for a stretch break. When I was ready to go again my clutch pedal hit the floor, I thought that the return spring had slipped off the pedal but I was wrong. I got out of the truck and checked to see if I had any fluid or auto parts lying under the truck and I found what looks like a metal crayon. What is it, where does it go, and did I blow my clutch? Please help.:CRY:
04-15-2007, 05:19 PM
Dave Severson

Sounds like the push rod out of the clutch linkage.... Goes from the linkage to the clutch fork.
04-15-2007, 06:05 PM
pro70z28

I was thinkin' the same thing before I scrolled down. We think alike Dave. How scarry is that for a Ford guy......:whacked: :whacked: :LOL: :LOL: :LOL: :LOL:
04-15-2007, 06:07 PM
Dave Severson

Quote:

Originally Posted by pro70z28

I was thinkin' the same thing before I scrolled down. We think alike Dave. How scarry is that for a Ford guy......:whacked: :whacked: :LOL: :LOL: :LOL: :LOL:

This would mean that as soon as you get all this chebbie foolishness out of your system you'll be building a Pro Street Mustang with that 815ci Ford Hemi I keep showing everybody pictures of.....:LOL: :LOL: :LOL: :LOL:
04-15-2007, 08:35 PM
Jas

is it an easy fix??? Or am going to have to find a box to live in so I can fix it?
04-15-2007, 08:40 PM
Dave Severson

Just put the clutch rod back in place and adjust the clutch linkage so it doesn't fall out again. If you're not certain of clutch adjustment procedures, might be best to check a Chilton's or Cloye's manual as improper adjustment will smoke the clutch in short order!!!!
04-16-2007, 05:11 AM
pro70z28

Hear we go again...... :LOL: :LOL: :LOL:

Don't hold your breath on the mustang deal Dave. I'd hate to see you turn "oval" blue. ;) :LOL: :LOL:
04-16-2007, 05:37 AM
Dave Severson

Hey, if I didn't pick on you, who would????:LOL: :LOL: :LOL:
04-16-2007, 08:06 AM
kitz

Uh, BTW Dave, how did you like that Chevy going around your Ford yesterday down here in Texas on the final lap? :LOL:

Dang, Chevy is puttin' the hurt on the ole' NASCAR field lately?:LOL:

Kitz
04-16-2007, 08:27 AM
nitrowarrior

Jas.....the 64 to 66 f 100 had a geometry mis match. To resolve it they put a hole in both the Z-bar attacthments at the rod you're referring to. It is for a spring to tighten up the slack on the rod. Not for tension or clutch adjustment, but to keep the silly thing in place when adjustment fell out of spec. If you don't have these holes, drill them and get the spring or one strong enough. I have owned three of these things (mid 60's f 100) and since I have had customers with the same complaint (c'mon, I can't have total hands on when thier trucks are in their driveway), I have had to resort to keeping things in place so I can drive it without finding the rod on the ground when I need to go to work or where ever. Then set the free play and travel where you're comfortable.
04-16-2007, 09:57 AM
pro70z28

Quote:

Originally Posted by Dave Severson

Hey, if I didn't pick on you, who would????:LOL: :LOL: :LOL:

It's actually a fairly long list Dave. :LOL: :LOL: :LOL: :LOL: :LOL: But I can take it, cuz' I'm comfortable in my Chevyhood. :LOL: :LOL: