-
torque converter shot??
ok heres what my trans is doing, reverse is slipping and making this grinding noise. OD is fine but when i stick it in first itll start making the same noise but its not as loud and its not slipping. and i got under my truck and had a buddy start it and its like clicking and its coming from the flywheel/torque converter area.
is it shot?
thanks guys
steve
-
Sounds like two different problems. The clicking could be a cracked flex plate. You'll be able to see it when you pull the trans to do a rebuild, there's major trouble with low and reverse. Grinding and slipping is never good.
-
thanks.
i dont get why it started doin this all of a sudden it worked great before i pulled it
-
What do you mean, "before I pulled it"?
-
i pulled it out of an S10.
all of a sudden earlier i lost every gear. its like all neutral.
it didnt make any noise or anything when it happened
-
If it's a 700r4, you probably didn't have the TV cable adjusted properly and burned up the thing. Those transmissions are very touchy when it comes to the TV system.
-
yeah is a 700 R4. and yeah my TV cable is probaly not adjusted right.
what are the chances that the clutches are shot???