Joker, I wish I had your kind of luck..... I just walked out to the shop to get the brackets and instructions so I could send you the right one.

Here's what the instructions say for the 727 and 904

"This installation simply accepts connection of the kit rod to the stock selector arm. Transmission arm/adaptor supplied with the kit are not used"

Basically what you have should hook up. From my experience, chances are you will have to "tweek" the rod you have somewhat, and you may want to redrill the hole in the arm that comes down off the shifter up higher so that you have a longer throw on the shifter and the gear changes don't seem so close together.