Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Tremec in a street rod
          
   
   

Reply To Thread
Results 1 to 5 of 5
  1. 08-11-2003 11:21 AM #1
    bulldogcountry1's Avatar
    bulldogcountry1
    bulldogcountry1 is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Oct 2002
    Location
    Vicksburg
    Car Year, Make, Model: 37 Ford 2dr. Sedan
    Posts
    197

    Question Tremec in a street rod

     



    Do any of you have any experience putting a tremec in a street rod? I plan on putting a 3550 behind a 351W in my '37 Ford, and have some questions.

    Shifter location?

    Type of Shifter?

    Type of Shift Arm?
    Andy

    My project build video:
    http://www.youtube.com/watch?v=iubRRojY9qM
    Reply With Quote Reply With Quote
  3. 08-11-2003 11:34 AM #2
    Bob Parmenter's Avatar
    Bob Parmenter
    Bob Parmenter is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Apr 2001
    Location
    Salado
    Car Year, Make, Model: 32, 40 Fords,
    Posts
    10,852

    Andy,
    Let's attach a link to the last time you brought this up to see if anyone has something new to contribute.
    http://www.clubhotrod.com/forums/sho...ghlight=tremec
    Your Uncle Bob, Senior Geezer Curmudgeon

    It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.

    Luck occurs when preparation and opportunity converge.
    Reply With Quote Reply With Quote
  4. 08-11-2003 11:49 AM #3
    bulldogcountry1's Avatar
    bulldogcountry1
    bulldogcountry1 is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Oct 2002
    Location
    Vicksburg
    Car Year, Make, Model: 37 Ford 2dr. Sedan
    Posts
    197

    Wow, you have a good memory!

     



    I haven't visited the board in a while, and I remember starting that thread. I was hoping to find some new information. I haven't had much time/money to work on my car lately. Everyone knows how that goes.
    Andy

    My project build video:
    http://www.youtube.com/watch?v=iubRRojY9qM
    Reply With Quote Reply With Quote
  5. 08-11-2003 12:01 PM #4
    89Silverado
    89Silverado is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Mar 2003
    Location
    Urbana, Ohio
    Car Year, Make, Model: '62 Impala '89 Silverado
    Posts
    12

    Here is a good article about installing a Tremec in a Chevelle. Might get some ideas from this. I imagine you could e-mail the one that wrote the article if you had some questions.

    Kevin
    Reply With Quote Reply With Quote
  6. 08-19-2003 08:29 AM #5
    joe gaddy
    joe gaddy is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    tulsa ok
    Car Year, Make, Model: 40 ford cpe/ 46 ford cpe/ 53 f100
    Posts
    38

    Bulldog, it seems like you can use a particular tailshaft housing from maybe an S10 pickup and put your shifter in pretty much stock posistion for a 37. George Poteet did this several years ago in a 40 cpe, it was featured in "American Rodder" magazine and I'm sure the article addressed the set-up.
    Joe
    Reply With Quote Reply With Quote
Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink