-
06-22-2005 05:34 PM #1
Tranny advice needed
I need some advice, I have a 402 BB in my 67 camaro and currently have a th350 with a stage 2 shift kit and was reccently overhauled (so I was told). I work at a wrecking yard and have a chance to buy a th-400 for 100 bucks canadian. I wanna do this and put a master overhaul kit and manual valve body in it to beef it up. My engine is built and computer dynoed to a underrated 400 hp. Im setting up to run a 150 shot of nitrious and i wanna make sure my tranny will handle the load. Should I go for the 400 and what are some of the things I should know and look for and what parts would you guys buy to beef up the 400. thanks.Last edited by dowierj; 06-22-2005 at 08:11 PM.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
Finally tracked down my AC leaks, had to buy a sniffer tool to do it. It was one hose fitting that attached to the condenser and one quick connect fitting on my AC manifold hose. The thrill of...
Stude M5 build