Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: C4 Transmission
          
   
   

Results 1 to 15 of 18

Threaded View

  1. #15
    R Pope is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2005
    Location
    Eston
    Posts
    2,270

    Your '66 3spd. is as good a 3spd as you'll ever get, it will handle a 302 for years. An early toploader 4spd will fit the bellhousing, same clutch,etc. Overdrive versions, too. (There are two different bolt patterns, watch out.)
    The C4 is a good choice for a 302, but there are several combinations that won't work, different ring gear diameters, starter locations, etc. Get the whole works at once from a donor car, then rebuild it. The main problem with a C4 is inadequate fluid flow to the cooler, limiting its towing ability. If you plan on towing a trailer or anything, go with the C6.
    Last edited by R Pope; 06-13-2005 at 06:36 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink