Thread: trans problem
-
04-08-2005 04:44 PM #1
trans problem
i was driving home and the carb started loading up for some unknown reason i had to foot brake it for about ten miles when it would down shift into low it started making a grinding noise by the trime i got home i had no low gear or reverse i have second and drive its like its locked between gears it didnt slip or anything like that just when you put it in low or reverse it wont move 69 350 turbo chevy
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
04-08-2005 06:58 PM #2
Check your fluid level! If the gears are grinding, then you are low on fluid which will fry your trans in no time!>: )
-
04-12-2005 11:26 AM #3
if you can hear an automatic gear noice you need a trany
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project