Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: What manual transmission?
          
   
   

Reply To Thread
Results 1 to 5 of 5
  1. #1
    staleg's Avatar
    staleg is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    Norway
    Car Year, Make, Model: 34 Ford Roadster High Boy
    Posts
    154

    What manual transmission?

     



    What manual transmission do you recommend?
    Most reasonable price?
    Reliable?

    From start the engine will be a 350 SBC. Later plans are 383 stroker kit.

    The car is a 34 Ford Roadster.
    The rear axle is Jagaur with 3,54:1.

    Is it ok to buy such things from wreck yards?

  2. #2
    urotu's Avatar
    urotu is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2005
    Location
    Albuquerque
    Car Year, Make, Model: '77 Blazer, '64 Buick, '29 A Tudor
    Posts
    135

    Buyin' A tranny from a boneyard is just like buyin' anything else from there. You just gotta look and get a good price and plan on rebuildin' most of the time. Sometimes you can find a good one, but I don't know what the boneyards are like in Norway. Do you have a preference for number of gears? An old 3 speed or older 4 speed will use mechanical linkage to engage the clutch, most newer 5 spds use hydraulic, so you would need to think about hooking it up to the pedal and mounting the clutch master cylinder. Not as bad as it sounds if you are pretty handy. I'd probably try to find one out of a late '60's early '70's GM car. You'd probaby find a muncie in most of those. Some of the later models used a saginaw and they worked pretty well too, not as tough as the muncies though.

  3. #3
    staleg's Avatar
    staleg is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    Norway
    Car Year, Make, Model: 34 Ford Roadster High Boy
    Posts
    154

    I'm planning on using a more modern 5 or 6 speed like the T56 or similar.
    It was US bone yards i was thinking of. Or eBay.
    To me it looks like I can choose between rebuildt ones, new ones or from a bone yard.
    I have a legal mailbox address at a shipping company in New Jersey. Then I can buy from sellers who don't send outside US, too.

    I'm aware of the hydraulic clutch problem, but since I'm using pedals from a car who also have hydraulic clutch, it won't be a problem after all.

  4. #4
    broncowheels's Avatar
    broncowheels is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2005
    Location
    Ballston lake
    Car Year, Make, Model: 88' Ford Bronco II
    Posts
    9

    When searching through a junkyard, avoid severely smashed cars. The drivetrain was most likely knocked out of alignment and nothing is usable. If you find a good trans, inspect it very very very carefully. You should catch problems now and fix them before they become a headache later.
    >: )

  5. #5
    urotu's Avatar
    urotu is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2005
    Location
    Albuquerque
    Car Year, Make, Model: '77 Blazer, '64 Buick, '29 A Tudor
    Posts
    135

    Originally posted by DennyW
    Well, that was fun. You ask for what to use, then you say you already plan to use. Little confusing.
    That's kinda what I thought too. It's all good though. It sounds like you already have a good idea of what you are doin'. Sounds like you got a good plan so far also. Go for it.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink