Thread: Chevy Turbo 400
-
03-27-2005 08:24 AM #1
Chevy Turbo 400
Any Turbo 400 experts out here. I have a Turbo 400 that shifts fine in 1st,2nd, and 3rd. Runs perfect no problem. But put it in reverse and the trans chatters like its slipping. Any ideas. This trans is only about a year old. Thanks .
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
03-27-2005 06:14 PM #2
Re: Chevy Turbo 400
Originally posted by b2zone
Any Turbo 400 experts out here. I have a Turbo 400 that shifts fine in 1st,2nd, and 3rd. Runs perfect no problem. But put it in reverse and the trans chatters like its slipping. Any ideas. This trans is only about a year old. Thanks .
thats gonna be on the inside b2zone. there is nothing to do to reverse without pulling the trans. down.Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
03-27-2005 07:43 PM #3
How is manual low? Does it shudder when pulling all the way down to 1st gear?http://www.cardomain.com/memberpage/647081
-
03-27-2005 08:32 PM #4
I had one repaired way back under waranty and it worked great except it would chatter in reverse. It seems that there was a seal that the lip had been rolled under when it was installed and it would not hold pressure in reverse.
Tom
On a bitterly cold winter morning a husband and wife were listening to the radio during breakfast. They heard the announcer say, "We are going to have 8 to 10 inches of snow today. You must park...
the Official CHR joke page duel