Thread: Transmission inquiry
-
02-09-2005 10:19 PM #1
Transmission inquiry
What are ya'lls views and reports on Auto Transmissions ? I'm going to run a 700R-4 in my coupe and was Curious , TPI, ? Has anyone used Phoenix out of Texas ? Stall speed ? Running a mild cam and Tuned Port inj.skiball
Nothing in life is to be feared but only understood.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
02-09-2005 10:51 PM #2
The 700r4 can be made plenty strong enough when built right and beefed up. I'm running a Blown 406 on 10 pounds of boost, cam is 538-558 advertised lift. Running a 2200 stall converter. I will say I haven't beat on it yet. But will once I get the pressures right. With the stall converter I've got, the car just sits there with very little pedal pressure. As far as Phoenix goes can't help you there.
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project